I did some digging around and it looks like the Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems # LC733960-182524 is not compatible with your Reico Titan manual truck camper jacks.
As it stands rights now, we do not have a compatible kit so your best bet is to upgrade and replace your entire system with the HappiJac Electric Truck Camper Jack System # LC736515-ELKIT.
This system has an overall weight capacity of 11,200-lbs (2,800-lbs per leg), a maximum lift of... view full answer...
You can definitely use manual scissor jacks on your camper. These can either bolt on or be welded to the camper's frame. They will give you much more stability.
To find the right ones, you will need to know how much lift you need and your camper's GVWR.
For example, the jacks from etrailer, part # e99012, have a 24" lift and 5000-lb capacity per jack. I've linked to a video review of these jacks for you.
If you need help determining which are the right ones for you, then you can tell... view full answer...
The only camper jack extension brackets we have are the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems # LC182496 which are swing out.
Theoretically you do not have to utilize the swing out function of the these brackets if you don't have a need to. These will still work fine as an extension. view full answer...
The HappiJac 4200 are the manual jacks. We do have the upgrade kits available. The Replacement Motor Heads w Circuit Board and Remote for HappiJac Electric Truck Camper Jack Systems # LC733960 are compatible with the 4200 series if you are replacing motor heads or your camper is already prewired for the electric jacks.
If you camper is not already prewired then you would want the Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems # LC733960-182524 which contains the... view full answer...
To find you the correct replacement jack handle for your Lance truck camper, I would need to know which jack that you currently have to be able to find the correct replacement jack handle you would need.
The Replacement Manual Jack Handle # EJ-3520-HD is for our etrailer jacks and RAM electric A-Frame jacks. This jack handle will not work with a drill. If you could send me a picture of your current jack I will be able to look more into it and see if I can find you the correct part.
I... view full answer...
It looks like the HappiJac 4100 series jacks had 34.5" of travel, and there are some parts available to replace things in a pinch, but with newer trucks getting taller it might be wise to upgrade to a whole new set of jacks. I recommend taking a look at the HappiJac Electric Truck Camper Jack System - 36-1/2" Lift - 11,200 lbs
Item # LC736515-ELKIT, which would give you 2" more of lift, which would be ideal for your new 2020 Chevy Silverado 3500.
If you've got HappiJac 4100 series camper... view full answer...
I went ahead and took, and we actually don't have a camper jack system that will lift 8 feet high. The closest I was able to find is the:
-Brophy Cable Camper Jacks # CJ74 which has a maximum lift of 67", as well as a combined weight capacity of 3,000-lbs.
These jacks use aircraft grade cables, is made in the USA, and can be disassembled into 3 pieces for easy storage.
I have attached a product review video for you to check out as well for you to check out. view full answer...
I may have a solution for you to upgrade to electric jacks, but your Rieco Titan jacks are not compatible with a HappiJac # LC733960. Instead, your best bet is going to be getting a new HappiJac system like the HappiJac Electric Truck Camper Jack System - 36-1/2" Lift - 11,200 lbs # LC736515-ELKIT. These are a great solution for newer trucks because they're able to provide 36-1/2" of lift and the electric jacks come with a remote to make the system extremely convenient. view full answer...
For your HappiJac 4500 Jack, you can use the Replacement Bevel Gears for HappiJac Truck Camper Jack Systems # LC182851 to replace your beveled gear. view full answer...
Thanks for the picture! I would be happy to help you Yes, you are correct in assuming you will only need one set of the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems Item # LC182496. These come in pairs and you will not need them for the rear set of jacks. Those are compatible with your HappiJack Electric Jacks. view full answer...
With your Sunlite Eagle weighing 1,050 pounds, I recommend the Brophy Cable Camper Jack # CJ41.Using these jacks have a combined weight capacity of 3,000 pounds and you will have no issues lifting up your 2004 Sunlite Eagle SB. The Brophy Lifting Jacks have a lifting range between 17 inches to 57 inches and have an overall height when assembled of 63 inches. When using these jacks always make sure that the jacks in pairs on level ground.
If you have any further questions please feel free... view full answer...
The Replacement Clutchless Motor Head for HappiJac Truck Camper Jacks # LC759927 will unfortunately not work with your current 4800 series jacks.
Since the 4800 series jacks have been discontinued, I recommend upgrading your system to the newer HappiJac Electric Truck Camper Jack System # LC736515-ELKIT.
This kit is compatible with the newer clutchless motorheads # LC759927, has a maximum weight capacity of 11,200-lbs, a lift of 36-1/2", and is made in the USA. view full answer...
It sounds like you're looking for TorkLift camper tie downs for your 2017 GMC Sierra 2500 Denali with a short bed. If you've got a factory hitch and no step or running board that extends under the bed of the truck, then the correct TorkLift tie downs are parts # TLC2220 (front), and # TLC3215 (rear). If you also need new turnbuckles, you can use the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black # TLS9529-2-LK.
If you actually need to replace... view full answer...
We have just what you're looking for. The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems # LC733960-182524 is compatible with your HappiJac 4160 Series jacks and will allow you to convert your system from manual to electric.
I've linked a quick video for you to have a look at, as well. view full answer...
Based on the size of your 2014 Coleman 262BH camper, I recommend going with a jack rated for 3,500 lbs. This is the most common size electric jack out there, so the good news is you have quite a few options. Keep in mind, the jack does not have to be rated for the weight of your trailer because it is only lifting the tongue weight of your trailer, but I will admit that jack weight capacities really don't make much sense for trailer tongue weights or gross vehicle weights.
It looks like... view full answer...
Sounds like you need the Replacement Clutchless Motor Head for HappiJac Truck Camper Jacks - Qty 1 # LC759927.
It is the exact replacement for the happiJac system motor head. view full answer...
You will most likely need the Replacement Motor Heads w Circuit Board and Remote # LC733960. These are a direct fit for 4150, 4220 and 4820 series jacks. As you mentioned you already have the Wiring # LC182524 you will not need the full Manual-to-Electric Conversion Kit # LC733960-182524. view full answer...
To support your slide out of your older camper, I recommend an Ultra-Fab Slide-Out Support instead of heavy duty jacks.
The Ultra-Fab supports are sold in sets of two and come in three sizes depending on your trailers ground clearance when the slide out is extended. The difference in the three sets we have is the height. The # UF19-9600001 has a range from 16 to 28 inches, the # UF19-960002 has a range from 21 to 37 inches, and the # UF19-960003 has a range from 26 to 47 inches.
All... view full answer...
No, the HappiJac Truck-Mounted Camper Tie Downs you have on your 2002 Dodge Ram 2500 are not going to also work with your 2014 Chevrolet Silverado 3500.
The two vehicle's will use completely different camper tie downs that'll fit two different frames.
Instead, for your 2014 Chevrolet Silverado, you're going to want to use the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC2219 for the front, and # TLC3212 for the rear. view full answer...
If you have the HappiJac 4800 series jacks you can add the Manual-to-Electric Conversion Kit # LC733960-182524. This will give you the ability to control the jacks from the included remote. The Remote # HJ54ZR will allow you to operate the jacks individually or simultaneously. view full answer...
Go To Results